4 Slotted Absorbent Pocket Sleeve, Absorbent Pouch
Description
4 Slotted Absorbent Pocket Sleeve
(4 Bay Absorbent Pocket Sleeve, Absorbent Pouch )
Item No. APS4X320
Basic Materials
Basic Materials Absorbent Paper Sheets, Poly Films
PRICE : Negotiate
Bulk pricing is automatically applied for orders of 5 or more.
Detailed Description
| Appearance | Uncolored materials in white appearance only |
| Intended Use | Packaging of UN 2814, UN 2900 and UN 3373 Biohazard Substances. Suitable for applications within the Clinical Research Organizations, Medical Service Centers, or Bio-Science Laboratories or Biorepositories etc. |
1. Ideal for Biological Substance Category B or Exempt Animal / Human Specimen packaging
Absorbent pads and pouches are designed to ensure safe and compliant storage
AIC’s absorbent pads are compliant storage and transport of diagnostic and clinical samples, infectious and
hazardous materials, chemicals, pharmaceuticals and environmental samples. These are available in a wide
range of absorbency levels calculated to meet all regulatory requirements. They are available with a leak-proof
adhesive closure, puncture resistance, printed tracking information and other features as required.
AIC was designed for the safe transport of laboratory specimen tubes by keeping the tubes separate and
providing cushioning at the same time. It consists of a multi-layered polymeric material that has extremely
high absorption properties. To use, simply place the tubes in the Absorbent bag and insert the Absorbent
bag into secondary packaging. AIC™ absorbent pads and pouches can be used together with 95 kPa specimen
transport bags as a complete secondary package solution.During shipment, Absorbent bag is best used in
combination with a 95Kpa bag or Sponge box to comply with DOT and IATA shipping regulations.
*Absorbent performance tests were conducted in-house and are approximate values only. The capacities and
durations may vary based on the type of liquid being absorbed.
Features and facts
| Features | Facts |
| Appearance | White paper + see-through poly film |
| Size of the 4 slotted pocket sleeve (4 bay sleeve) | L 191 x W 170 mm (+/-5mm) |
| Internal Size of each bay | L 150mm x W 40mm (+/-1mm) |
| Maximum diameter of the tube that each bay can accommodate | OD 25mm |
| Minimum Absorbent Capacity (by normal saline, 25 ºC) | 320 ml |
| Packing | 2400 sleeves per outer carton |
| Humidity Range | Keep in a cool and dry place |
| Sunlight Effect | Keep away from direct sunlight or fluorescent light |
1. These pressure bags are made with a custom film structure that features a strong adhesive closure
and continuous seal, which makes it ideal for critical liquid and substance containment. The permanent
adhesive closure withstands a temperature range of -40⁰C up to +55⁰C (-40⁰F up to +130⁰F).
2. Take the guesswork out of packaging, protecting and shipping four inner containers of your hazmat
materials in one box with AI 650’s 4GV Packaging Kits. These UN-certified, Variation Two shippers are
suitable for shipping hazardous liquids or solids in Packing Groups I, II and III by any mode of transportation.
They can accommodate your own glass or plastic bottles which must pass hydrostatic pressure tests to
meet ISTA Procedure 1A when shipping by air. These kits include everything you need to protect your
containers’ internal contents, such as absorbent pouches, fiberboard insert, fiberboard pads, ties,
pressure-sensitive tape and a 4GV corrugated outer box. Available in two sizes, you can ship either
four 8-oz. or four 1L containers. Save yourself time and avoid packaging errors and compliance issues
when shipping four inner containers of hazardous materials by using one of these all-inclusive 4GV
packaging kits.
3. It is suitable for transport packaging of pipes, bottles, containers or some samples with potential infectious
sources to the laboratory. This series of products received 95KPa pressure and leakage test in the temperature
range of -40 ° C to +50 ° C;
4. Specimen transport bags are liquid tight and tamper evident. The patented adhesive closure and continuous
seal meet or exceed standards of all major air carriers and DOT. Polyethylene construction and adhesive
closure provides added security during handling by personnel.
5. How to Close The Shipping Bag Properly
Specimen shipping bags in this carton are designed to perform at high internal pressure, should an airliner
lose its cabin pressure. So, in order for the bag to be effective and perform to its design capabilities, the
bag must be closed properly after insertion of the specimen
